Go away for an extended period without worrying about keeping your wood furnace operational. The Napoleon® Hybrid Series furnaces switch from wood to the supplementary heating source (electric for the HMF100, electric, oil and gas for the HMF150 and HMF200) automatically. If the furnace runs out of wood, a second thermostat controlling the optional electric, oil or gas components will keep your home warm and toasty even if you are not at home, without any interruptions. Even with power failures, the furnaces (wood only) are designed to use gravity air flow for emergency heating. High fire can be maintained by using a manual override on the primary air control.

Features

Advanced Combustion System

• Five stainless steel tube combustion system achieves a secondary burn cycle
• Energy from wood and also wood gases, mixed at the precise ratio of temperature and oxygen
• Clean burn without a catalytic combustor
• Horizontal jets of super heated secondary air mix with smoke to burn off released smoke particles
• Torch-like secondary flames just below the ceilining result in more heat, cleaner air, fast start up, less chimney maintenance and less trips to the woodpile

Solid Construction and Automatic Combustion Control

• 5.0 cubic foot solid build
• Fully welded and completely lined combustion chamber
• Bypass damper and preheated outside air feed directly into the combustion chamber
• Rapid responsiveness and maximum heat control
• Thermostat sets the desired heat level for a clean and consistent burn

Solid Construction and Automatic Combustion Control
Hybrid Series furnaces come standard with a fully welded and refractory brick lined combustion chamber, similar to a kiln, for many years of safe and trouble free performance. The thermostat sets the desired heat level for a roaring fire and then shuts down for a long, clean and consistent burn. A Bypass Exhaust Damper built into the HMF150 and HMF200 ensures quick and clean start ups.

Advanced Combustion System
A stainless steel tube combustion system achieves a secondary burn cycle. Not only are you getting energy from the wood, but also from the wood gases which are mixed at the precise ratio of temperature and oxygen. To achieve an extraordinary clean burn without a catalytic combustor, horizontal jets of super heated secondary air are mixed with the fire’s smoke to burn off released smoke particles. You can watch the torch-like secondary flames just below the ceiling during the burn. This results in more heat, cleaner exhaust, fast start up, less chimney maintenance and less trips to the woodpile.

• Napoleon HMF200 Hybrid Furnace - No Longer Available Specifications

• Napoleon HMF200 Hybrid Furnace - No Longer Available Brochure

• Napoleon HMF200 Hybrid Furnace - No Longer Available Owner's Manual

CLICK HERE TO VISIT OUR NEWER WEBSITE WHERE YOU CAN FIND PRICING AND MORE INFORMATION