Napoleon HMF150 Hybrid Furnace
Napoleon Heating & Cooling is proud to be committed to your total home comfort. Time after time, Napoleon has led the way with new and innovative, patented technology that continually surpasses industry standards. More than anything we want you to feel confident in choosing Napoleon for your home, our products are designed to provide that confidence and ensure that every Napoleon Product is beyond compare.
Napoleon's Hybrid 150 combination furnace is an extremely clean burning wood furnace, with an efficiency rating of 88.6% and EPA emissions of 4.7 grams per hour. The Napoleon Hybrid 150 is one of the cleanest and most efficient combination solid fuel burning furnaces on the market today.
- Photos (10)
- Videos (3)
- Add Review
Go away for an extended period without worrying about keeping your wood furnace operational. The Napoleon® Hybrid Series furnaces switch from wood to the supplementary heating source (electric for the HMF100, electric, oil and gas for the HMF150 and HMF200) automatically. If the furnace runs out of wood, a second thermostat controlling the optional electric, oil or gas components will keep your home warm and toasty even if you are not at home, without any interruptions. Even with power failures, the furnaces (wood only) are designed to use gravity air flow for emergency heating. High fire can be maintained by using a manual override on the primary air control.
Triple Fuel Combination for Peace of Mind
Advanced Combustion System
Solid Construction and Automatic Combustor Control
Impressively large 3.75 cubic foot combustion chamber
Choice of door between insulated for maximum heat distribution or glass so you can see the fire!
Solid Construction and Automatic Combustion Control
Hybrid Series furnaces come standard with a fully welded and refractory brick lined combustion chamber, similar to a kiln, for many years of safe and trouble free performance. The thermostat sets the desired heat level for a roaring fire and then shuts down for a long, clean and consistent burn. A Bypass Exhaust Damper built into the HMF150 and HMF200 ensures quick and clean start ups.
Advanced Combustion System
A stainless steel tube combustion system achieves a secondary burn cycle. Not only are you getting energy from the wood, but also from the wood gases which are mixed at the precise ratio of temperature and oxygen. To achieve an extraordinary clean burn without a catalytic combustor, horizontal jets of super heated secondary air are mixed with the fire’s smoke to burn off released smoke particles. You can watch the torch-like secondary flames just below the ceiling during the burn. This results in more heat, cleaner exhaust, fast start up, less chimney maintenance and less trips to the woodpile.
|Oil module (optional)||70,000-93,000 Up to 85% AFUE|
|Electric Module||70,000 BTU 20KW|
|Blower||3 speed 1400 cfm|
|Recommend exhaust pipe||6"|
|Recommend exhaust pipe||7"|
|Type of chimney||High Temperature|
|Max Log Length||24"|
|Loading Capacity||74 lbs|
|Dimensions wood w/ blower||53"W x 35"D 52"H|
|Wood/oil w/ blower||53"W x 45"D x 52"H|
|Wood/electric w/ blower||65"W x 35"D 52"H|
|Wood/oil/electric w/ blower||65"W x 45"D 52"H|
|Clearances around furnace for servicing||24" back/ sides 48" front|
|Firebox dimensions||18"W x 24"D 15"H|
|Firebox front opening||15 3/4" W x 9 3/4" H|
|Ash drawer dimensions||13"W x 18"D x 2 1/2"H|
|Hot air plenum dimensions||22" x 24"|
|Cold air plenum dimensions||14" x 23"|
Optional oil burner module
Napoleon HMF Furnace Product Overview
Napoleon HMF Multi-Fuel Furnace Review - Inside the Furnace
Napoleon HMF Furnace Review - Bypass System