Napoleon Huntsville 1100PL Leg Stove
The Napoleon Huntsville 1100PL Wood Stove is a highly efficient leg model stove which not only looks great, but provides a lot of reliable heat which can be easily adjusted by the single lever burn control.
- Photos (5)
- Videos (2)
- Add Review
The leg model is available in two different sizes - see specs below. (No longer available in green)
The easy operation of a single lever burn control regulates primary and secondary air establishing a perfect mixture and providing a clean burn.
EPA approved to Phase 2 of the 1990 test Standards and below Washington's DEQ Phase 3 with emissions as low as 3.7 grams per hour.
The 6" flue assures you of efficiency and cost saving installations.
Secondary air tubes insulated with ceramic fiber and protected with a stainless steel cover plate ensures complete combustion.
Upper firebox lined with ceramic fiber baffles. The advantage of light weight ceramic is three fold:
Ease of installation: only two pieces
Lighter, easier to handle.
The thermal dynamics of ceramic fiber allows for quicker startup and a hotter, cleaner burn
Non-catalytic high tech design eliminates the need for a delicate ceramic catalytic combustor which can deteriorate over time.
Large viewing area -- air wash in combination with high temperatures keeps the viewing glass clean
President's Limited Lifetime Warranty
|Specifications||The Napoleon Huntsville 1100PL Wood Stove|
|Emissions (grams per hour)||4.1|
|Width x Height x Depth||25 1/2" x 33 1/4" x 22 1/2"|
|Firebox Chamber (W.H.D.)||18" x 12" x 13 1/2"|
|Firebox Capacity||1.7 cu. ft.|
|Door Size (height x width)||14 3/4" x 19 3/8"|
|Weight without bricks||215 lb.|
|Weight of Bricks||110 lb.|
|Approximate Area Heated* sq. ft.||600 - 1,500|
|Heat output BTU/h**||11,700-42,200|
|Heat output BTU/h (high burn)***||55,000 BTU|
|Burn Time (low fire)*||7 hours|
|Mobile Home approved||no|
|R-2000 approved (Canada)||yes|
|Max. Log Size||18"|
|Outside Combustion Air||no|
|Flue size prefabricated||6"|
|Minimum Clearances with Single Wall Chimney Connector from Stove to Combustibles|
|Minimum Clearances with Approved Double Wall Pipe from Stove to Combustibles|
*Figures may vary with individual conditions. Please consult your specialty dealer
**EPA (Environmental Protection Agency) rated BTU/HR with softwood test fuel (for emissions testing only) - no refueling
***Wolf Steel Ltd. own test results showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.
Boss of the Swamp: Woodstove & Chimney Maintenance (Part 1)
Boss of the Swamp: Woodstove & Chimney Maintenance (Part 2)